The Normally Open Valve is in an open state under normal conditions and only closes when it receives a control signal. It is suitable for scenarios where continuous water flow is required, and the system only needs to be closed when necessary.

The Normally Closed Valve is in a closed state under normal conditions and only opens when it receives a control signal. It is suitable for systems that need periodic opening, and water flow is required only under specific circumstances.

The Time Delay Valve opens or closes after a certain delay upon receiving a control signal. It is suitable for scenarios where switch operations need to occur at specific time intervals, such as irrigation systems or other timed control systems.

Flush Valves are commonly found in bathrooms, sewage treatment systems, etc. They provide a larger flow rate for quickly eliminating debris or residue from the pipeline.

Discharge solenoid valve is a device that controls water flow through electromagnetic action. It can automatically sense the water level and open the drain when it reaches the set water level, allowing excess water to flow out. It has high reliability, long service life, and simple maintenance.

When the water supply is cut off or the water pressure is insufficient, the low-pressure switch will automatically stop the machine from working to prevent the booster pump from idling and causing circuit damage when there is no water. The high-pressure switch controls the machine to start. When the water storage tank is full, the pressure in the machine pipeline increases, and the high-pressure switch will stop the machine from working.